Now, in the CLI (Command Line Interface), the configuration of routers and switches, click on a console. A command and press Enter (Return – Enter) and then do it again the following commands. Different words can be written in the same line.
Cisco IOS contains images of very large documents and step by step guide to help you, learning topics is excellent, even in case you disagree with a network simulator. In the next exercise you will learn to switch between different directions in a Cisco router. You ought to check every time you needed to modify the configuration of a router. You can go to the level of interaction with interfaces and devices. This means that some commands to work in direction, but otherwise nothing. That is why they would like to modify the mode, when a specific command. However, the commands now work privileges in a worldwide configuration mode to do.
More Cisco Internetworking Operating Process (IOS), the commands are not fully developed. Tell the store quickly, you require only an element of an order is placed, you can shorten all the words of a command. For example, the command reduced e. Another example is the command show running-config. Type she run. The router or switch to recognize and understand what you mean and executes the command. You have letters of each word in order to detect the router or switch and correctly interpret what you are trying to do. Otherwise, you receive a warning that or more of its words are clear. Normally, after changing a device that you require to keep, so do not be lost after a reboot of the device. The current configuration is only in memory and on a traditional reboot or power failure, the loss of the current configuration. Therefore, the current settings, DRAM exist to save the startup configuration in NVRAM stored permanently present. You can use the configuration file in NVRAM DRAM using the copy running-config startup-config.
